No camera running
Start the camera to score automatically, or score by hand on the keypad below.
ReadyPress Start camera to begin, or use the keypad.
Lower sensitivity catches thinner darts but reacts more to lighting flicker. Calibration is saved for this camera.
- Fix the webcam in front of the board, a little to one side or above. It must not move after calibrating.
- Light the board evenly with no glare. Turn off auto-exposure and auto-focus if your camera software allows.
- Calibrate by clicking the outer edge of the double ring, on the wire at 20|1 (top), 6|10 (right), 3|19 (bottom) and 11|14 (left). The 20 must be at the top.
- The blue grid should then sit on the wires. If it does not, calibrate again.
- After three darts play moves to the next player by itself. Pull your darts and step back; scoring restarts when the board is clear. If it does not, press Board clear (Space).
- Press Fit board on the video (or + and −) to zoom in on the board. Zooming gives detection more detail and keeps your calibration.
- Darts read as Miss? Check that the yellow line drawn on a detected dart runs along the whole dart, and lower the sensitivity if it only covers the flight.
- Misread? Press Fix last (F), then click where the dart really landed or tap it on the keypad.